Your Cart is Empty
The Vintorio Wine Aerator Pourer
A crucial and often ignored step in fully enjoying wine is letting the wine breathe, or exposing the wine to oxygen by allowing it to aerate before you drink it. Unfortunately, proper aeration can sometimes take up to two hours through traditional methods.
That’s where Vintorio comes in! The Vintorio Wine Aerator Pourer effectively and instantly brings the best out of your wine in less than 30 seconds! With the Vintorio Wine Aerator Pourer, you can dramatically improve your wine’s aroma and flavor as you pour.
The Vintorio Wine Aerator Pourer is very easy to use! Simply take the aerator out of its case, pop onto the wine bottle, and pour! You can also follow the more detailed instructions here:
Additional Tips: Make sure that the Vintorio logo and the three air holes are both facing the same direction (upright) while pouring. Some users assemble the Vintorio Aerator upside-down, this will not create a leak-free seal and will cause wine to leak out of the air holes when pouring. If the rubber gasket of your aerator “scrunches up” or if you have a hard time inserting your aerator into your bottle, it is because the rubber gasket was stored in a dry area. To resolve this issue, simplya wipe the rubber gasket with a damp piece of cloth and try again.
We recommend handwashing the Vintorio Wine Aerator with warm water after use. For a more thorough cleanse, you can disassemble the Vintorio Wine Aerator Pourer.
* Do not use force to twist or take the two units apart.
* The clear acrylic piece and the black flow regulator unit will not create a leak-free seal if this is not done properly.
The Original Vintorio Aerator Pourer instantly brings out the flavors and aromas of your wine and is as simple to use as pouring straight from the bottle.
It also combines the effectiveness of a hand-held aerator with the convenience of a pourer to bring out the best in every glass.
We know that things happen, and it's easy to misplace a piece or two! So, we created a replacement pack for our best-selling Vintorio Wine Aerator Pourer. The replacement parts set include several extra replacement o-rings (rubber rings) and two extra stems (air tubes).
Here's what to check for if your Vintorio Wine Aerator Pourer is leaking! Most of the time, it's an easy fix, and we find that the following will prevent any future leaks.
A leak in the Vintorio Aerator Pourer may mean that there is something wrong with the seal between the clear spout and black plastic flow regulator. The seam between the two units is usually very tight because it is sealed with a clear rubber washer, and will not leak unless there is something wrong with the washer. Here is how to fix it:
1. Make sure that the Vintorio Logo and the three air holes are facing the same direction (upright). Some users assemble the Vintorio Aerator UPSIDE DOWN, this will not create a leak-free seal and will cause wine to leak out of the air holes when pouring.
2. Make sure the clear rubber washer on the bottom on the clear spout is not lost or missing. The clear rubber washer is glued onto the top groove of the spout but may sometimes get lost during cleaning.
If these solutions do not resolve your issue, please contact us at support@vintorio.com and we can figure it out together! If you somehow managed to get a defective product, we truly apologize in advance and we will be able to replace it, free of charge.
We're happy to answer any questions you may have about the Vintorio Wine Aerator Pourer! Please leave a message and we'll get back to you as soon as possible.
on all of our products
on all U.S. orders over $30
send us an email at support@vintorio.com
on Amazon
